Setting up SNMP via WinBox is straight forward, the following commands are how to set it up from the command line with some troubleshooting info at the end. Posted in Mikrotik | Tagged mikrotik, remote, ssh, wifi, wisp | Leave a reply SNMPv3 snmpwalk Mikrotik # INTERFACE RADIO-NAME MAC-ADDRESS AP SIGNAL. WA.v8.4.2# ssh 'interface wireless registration-table password: WA.v8.4.2# ssh 'interface wireless password:Īrp=enabled interface-type=Atheros AR9300 mode=station ssid="WiFi"
WA.v8.4.2# ssh 'interface wireless set disabled=no ssid=WiFi password: Scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 Wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=noīridge-mode=enabled default-authentication=yes default-forwarding=yesĭefault-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=noġ R name="wlan2" mtu=1500 l2mtu=1600 mac-address=74:4D:28:0F:69:B2Īrp=enabled interface-type=Atheros AR9888 mode=ap-bridge ssid="WiFi"įrequency=5180 band=5ghz-n/ac channel-width=20mhz secondary-channel="" Scan-list=default wireless-protocol=any vlan-mode=no-tag vlan-id=1 WA.v8.4.2# ssh 'interface wireless password:Ġ name="wlan1" mtu=1500 l2mtu=1600 mac-address=74:4D:28:0F:69:B3Īrp=enabled interface-type=Atheros AR9300 mode=station ssid="MikroTik"įrequency=2412 band=2ghz-b/g channel-width=20mhz secondary-channel="" Enter/Return key not working to run commands, so running the commands over ssh from the radio. Wireless router is behind a NAT, using UNMS to ssh into the radio, and from the radio ssh into hAP. Problem – Need 2.4 Ghz network enabled and SSID set to WiFi.
0 kommentar(er)
